User manual Bowers & Wilkins 683 S2 (English (2024)

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

The Bowers & Wilkins 683 S2 has a weight of 27200 g.

The Bowers & Wilkins 683 S2 has a height of 985 mm.

The Bowers & Wilkins 683 S2 has a width of 190 mm.

The Bowers & Wilkins 683 S2 has a depth of 364 mm.

Ensure that you use high-quality speaker cables and connect them to the corresponding terminals on the back of the speaker. Make sure the positive terminal of the cable connects to the positive terminal on the speaker, and the same for the negative terminal. Connect the other end of the cables to the appropriate outputs on your audio source.

For an optimal listening experience, it is recommended to place the speakers at least 2 meters apart from each other and ensure they are equidistant from the primary listening position. Try to position them away from walls or corners to minimize unwanted reflections.

To bi-wire or bi-amp your speakers, you will need to remove the metal bridge plate located between the two pairs of terminals on the back of the speaker. Then, connect separate speaker cables to each pair of terminals, ensuring the positive terminal is connected to the corresponding positive terminal on your amplifier or receiver.

The Bowers & Wilkins 683 S2 does not have built-in bass or treble adjustment controls. However, you can fine-tune the sound by adjusting the settings on your amplifier or receiver. Refer to the manual of your audio source to learn how to adjust these levels effectively.

The Bowers & Wilkins 683 S2 is designed to work efficiently with amplifiers that have a power rating between 25 and 200 Watts per channel at 8 Ohms. Ensure that your amplifier falls within this range to maximize the performance of the speakers.

No, Bowers & Wilkins 683 S2 does not have an amplifier. This means that you will need to connect it to an external amplifier or receiver in order to use it.

Bowers & Wilkins 683 S2 has 1 tweeter driver. This means that it is capable of producing high-frequency sounds with precision and clarity.

The woofer in Bowers & Wilkins 683 S2 has a diameter of 6.5 inches (165 mm). This larger size allows for deeper bass response and a more powerful sound.

Bowers & Wilkins 683 S2 has 1 mid-range driver. This means that it is capable of reproducing mid-frequency sounds with accuracy and detail.

The recommended usage for Bowers & Wilkins 683 S2 is as a speaker set unit. This means that it is designed to be used as part of a larger audio system, such as a home theater setup, to provide high-quality sound.

Yes, the manual of the Bowers & Wilkins 683 S2 is available in English .

No results